MOTEC Pro Lambda Meter PLM Kit, Air Fuel Ratio meter, Wideband O2 sensor

Description

Brand new still sealed in box.  Never used, been in storage for years.  I've used a PLM to tune some expensive engines and have trusted it for extreme usage.
The MOTEC PLM is the benchmark standard for wideband O2 sensors.  It allows the use of Bosch LSU4.0/4.2 and the NTK UEGO sensor.  The NTK sensor is used in some of the highest levels of motorsport for it's leaded fuel resistance and higher accuracy.
This kit comes with the Bosch LSU4.0 that is brand new in sealed bag, never been run.  Only imperfections are a small white paint mark on the plastic box, and a missing MOTEC decal on the box lid.
New this kit is ~1550USD.  Save the bucks for your other mods.
Incudes Bosch LSU4.0 wideband 02 sensor, Sensor and power harness, PLM display and processor unit, PLM to computer harness, and stainless steel weld on O2 sensor bung.
Pro Lambda Meter Kit, LSU 4.0, 6 meter
General
CAN communications up to 1 Mbit
RS232 communication for configuration
Analogue output providing differential voltage
Maximum 8 ampere sensor heater
Multiple
PLM
s (up to 16) can be connected together
Available as part of complete kits
Usable as an alternative to wideband Lambda upgrades in MoTeC
ECU
s and Dash Loggers
2 x 9 pin Dsub connector
Robust aluminium enclosure
Measurement/Configuration
Compatible fuel:
gasoline/petrol
alcohol
LPG
diesel
user defined 'blend' fuel
Comprehensive diagnostic and status channels
Calibration methods:
automatic, using the sensor's built-in calibration resistor
manual table entry
known oxygen environment
calibration constant
Standard configuration tables
Configurable to compensate for sensor aging and contamination
Accuracy +/– 1.5%
Operating range:
Lambda 0.7 to 32
AFR 10.3 to 470 for gasoline/petrol
oxygen 0 to 22%
Display
Display configurable to show Lambda, Air Fuel Ratio or equivalence ratio
Flexible display setup configurable for
resolution (decimal points)
display update rate
display filtering
backlight intensity
Easy to read 3.5 digit LCD with 12.7 mm (½") digit height